Skip to main content

Why Having A Coach Is Important.

Cocoa Butter Soap and Shear Butter Soap for normal to dry skin




Ingredients
Cocoa Butter/Soap
846g Coconut oil
269g Cocoa butter
242g Palm oil
213g lye
505ml Distilled water



Shea Butter Soap
500g OIive oil
250g Palm oil
333g Coconut oil
263g Shear butter
178g Lye
479ml Distilled water

Apparatus
20 litres mixing bucket, Stirrer, Thermometer, Weigh balance, Mold, Towel, cardboard, different containers for oil and lye, measuring spoon.

Procedure
  • Choose one of the types of Soap you want  to make and follow the following instructions carefully
  • Make sure you put on protective clothes, goggles and gloves to protect your body against spillage.
  • Always keep vinegar with you to neutralize burns of chemicals.
  • Weigh out all the ingredients as listed above on a weighing balance
  • First dissolve lye into water and watch the temperature until it is closer to somewhere around 70 degrees Celsius
  • Add all the oils together and heat the oil under low temperature to 55 degree Celsius then drop the oil down.
  • By this time your lye should be the same temperature as the oil.
  • Gradually turn the lye into the bucket containing the oil and stir continuously until you it has mixed to trace. It may take about 20 - 30 minutes to trace
  • Turn this mixture into their various molds and allow to stand in the mold for 48 hours. Cover the soap with a cardboard paper and finally cover with a thick towel to keep it warm.
  • After 48 hours, remove the soap and cut them to size, put them in a waterproof bag and allow for 4 weeks to cure. After 3 weeks, your soap is ready for use.

Cocoa/Palm Soap and Shea Butter Soap is good for normal to dry skin










Comments

  1. Here's an authenticated test comment. See:

    https://productforums.google.com/forum/#!category-topic/blogger/iK2146jcu0A

    ReplyDelete
  2. Here's an authenticated, anonymous test comment. See:

    https://productforums.google.com/forum/#!category-topic/blogger/iK2146jcu0A

    ReplyDelete
  3. Here's an un authenticated, anonymous test comment. See:

    https://productforums.google.com/forum/#!category-topic/blogger/iK2146jcu0A

    ReplyDelete

Post a Comment

Your comments are highly valued as it will go a long way to help us serve you better.

Popular posts from this blog

How is semovita Produced?

In the previous post we discussed  how cassava is processed into garri ( cassava flour) from harvesting to frying. Today, we are going to look at how to make Semovita using cassava and maize or guinea corn.

Natural ways to make your teeth white and sparkling

There are a lot of synthetic teeth whitener products out there. We tend to change from one product to the other without yielding the desired result. Sometimes, they actually yield result with severe consequences greater than their benefit. We nearly or completely forget the cheap, natural and safe methods of brushing our teeth that will make it whiter, sparkling and healthier.

Simple steps on how to produce Harpic toilet cleaner

  Harpic  is the  brand name  of a toilet bowl cleaner. It has been found to be effective in removing  stains  on tiles, lavatories and  bath etc. It is highly recommended that you put on gloves, protect your eyes  with goggles to avoid spillage from highly concentrated acid. Be very careful, keep chemical far away from children. Most of the chemicals here are very corrosive.

Simple steps on how to make Izal

Izal  is one of the common disinfectant used regularly at home,schools, hospital, and different place. It  is highly concentrated and very effective when used in toilet cleaning, floor tiles and other surface. Below are simple steps on how you can make izal disinfectant.  To avoid wastage,  you can divide it by two to produce in 5  litres . The measurement for this izal is for 10litres. If you want to produce in large quantities, multiply each measurement by the amount you want to produce. You can also click here to learn how to make dettol liquid antiseptic.